How to Crop a PDF: Remove Margins, Trim Scans and Keep Only Part of a Page

By Adel Elmoslemany, founder of DonePDF About 14 minutes to read

Cropping is the quickest way to get rid of wide white borders, trim a crooked scan, or keep just the table you need from a page. This guide explains what cropping really changes inside a PDF, how to select the area (by dragging, automatically or with exact measurements), and when another tool is the better choice.

Open the Crop PDF tool

Every task below has a button that opens the tool with the right settings already chosen; you only add your PDF.

What cropping a PDF actually does

Every PDF page has a box that tells a viewer which part of the page to show. Cropping makes that box smaller. The viewer then shows only the area inside it, and everything outside it disappears from view, on screen and when printed.

Three things follow from this, and they explain most of the questions people have about cropping:

  • The quality stays the same. The page is not redrawn or turned into a picture, so text stays sharp, selectable and searchable.
  • The file size stays about the same. The hidden area is not deleted, it is only out of view.
  • The hidden area is still in the file. Some editors can show it again. Cropping is a layout tool, not a way to remove private information.
Important: if the part you want to get rid of contains names, numbers or anything confidential, use Redact PDF. Redaction removes content for good; cropping only hides it.

Before you start

  • Check that the PDF opens without a password. A password-protected file cannot be cropped. If you have the password, remove it first with Unlock PDF.
  • Know which pages need cropping. A cover page or an appendix often has a different layout from the rest. You can crop all pages, only the page you are looking at, or a range of pages.
  • Fix sideways pages first. Cropping follows the page as you see it on screen. If some pages are sideways, turn them upright with Rotate PDF before cropping, so "top" and "bottom" mean what you expect.
  • Keep the original. The tool gives you a new file and leaves your original untouched, so you can always start again.

How to crop a PDF with DonePDF, step by step

  1. Open your PDF. Go to Crop PDF and drop the file into the box, or click "Select PDF". The first page appears twice: the original on one side and a cropped preview on the other.
  2. Select the area to keep. The quickest way is to drag on the original page: a box appears, the rest of the page is shaded, and the cropped preview updates at once. Drag the box to move it, drag its handles to resize it, and double-click to start again. With the box selected, the arrow keys move it by 1 mm (10 mm with Shift).
  3. Or choose a crop mode. "Auto-detect white margins" finds the white border for you. "Margin Cropping" cuts the same amount from the sides you tick. "Manual Selection" lets you type left, right, top and bottom separately. Dragging the box fills in the Manual Selection values, so you can fine-tune them afterwards.
  4. Check the result. Watch the cropped preview, and use "Previous Page" and "Next Page" to check other pages before you save. Values can be entered in millimetres, inches or points (the "Units" list).
  5. Choose where to apply it. Under "Apply To", pick "All Pages", "Current Page Only", "Odd pages", "Even pages" or "Page Range" (for example pages 2 to 14). Pages outside your choice stay exactly as they were.
  6. Choose the result. Under "Download as", keep PDF or pick PNG or JPG images (150 or 300 DPI). Optionally type a name under "Output PDF Name".
  7. Click "Crop PDF". The cropped copy is saved to your device. Several files or several images come together in one ZIP file.
Tip: when you type values, start small, such as 5 mm, and increase them while watching the preview. It is easier to add a few millimetres than to notice afterwards that a page number or the last line of text was cut off.

Crop a PDF on iPhone, Android, Mac, Windows or Linux

The Crop PDF tool is a web page, so there is nothing to install. It works the same way in an up-to-date browser on a computer, tablet or phone.

DeviceWhere to find your PDFWhere the cropped file goes
iPhone / iPad (Safari)"Select PDF" opens the Files app (iCloud Drive, On My iPhone, mail attachments you saved)The Downloads folder in Files, or Safari asks where to save it
Android (Chrome)"Select PDF" opens your files, Drive or DownloadsThe Downloads folder
MacDrag the file from Finder onto the page, or use "Select PDF"Your browser's download folder (usually Downloads)
Windows / LinuxDrag the file from your folder onto the page, or use "Select PDF"Your browser's download folder (usually Downloads)

On a phone: the screen is narrow, so the settings appear after the preview; scroll down to reach the crop values and the "Crop PDF" button. You can draw and move the crop box with your finger. Very large files take longer on a phone, because the work happens on the device itself; a computer is faster for long documents.

Which way of cropping should you use?

MethodHow it worksBest for
Drag a boxDraw the area on the original page, then move or resize itKeeping one part of a page: a table, a chart, a photo
Auto-detect white marginsFinds where the content starts on each side and cuts the white space, leaving the extra space you choose (2 mm by default). It can check every page separately or use the current page for all pages.Removing white borders from many pages at once, including pages whose borders differ
Margin CroppingOne value, cut from the sides you tickEven borders, slides, removing a strip from the top or bottom
Manual SelectionA separate value for each side, a "Crop to a size" list, and an option to mirror left and right on even pagesExact measurements, standard sizes, book scans
Split each page in halfTurns every chosen page into two pages: left and right halves, or top and bottom. For right-to-left books, the right half can come first.Scanned two-page spreads, A3 sheets that hold two A4 pages
Remove existing cropShows the whole page again on the chosen pagesA PDF that was cropped before, if the hidden area is still in the file

A simple rule: for white borders, start with Auto-detect. To keep one area, drag a box. When you need exact numbers, use Manual Selection.

How to choose the right millimetres

The values you enter are cut from the edges of the page. To keep a specific area, it helps to know the size of the page you are working with.

Paper sizeWidth × height (mm)Where it is common
A4210 × 297Most of the world
US Letter215.9 × 279.4United States, Canada
US Legal215.9 × 355.6Legal documents in North America
A5148 × 210Booklets, notebooks

You don't have to convert: the "Units" list switches all values between millimetres, inches and points, and the tool remembers your choice. For reference, 1 inch is 25.4 mm, and 1 point (the unit PDF software uses) is 1/72 inch, about 0.35 mm.

Example: keep only the lower half of an A4 page

An A4 page is 297 mm tall. To keep the bottom half, cut about 148 mm from the top and nothing from the other sides. Then fine-tune: if the heading of the table is cut off, lower the top value a few millimetres at a time until it appears in the preview.

Example: trim a 2 cm border

A page with roughly 2 cm of white space on every side needs about 20 mm of Margin Cropping on all four sides. Leaving 2–3 mm of white space (so 17–18 mm) usually looks better than cutting right up to the text.

Mixed page sizes: the same millimetres are cut from every selected page. If your file mixes A4 and Letter pages, or portrait and landscape pages, check a page of each kind in the preview, or crop each group separately with a page range.

Common tasks and how to do them

Remove white borders from a scanned document

Scanners often capture a strip of the scanner lid or a grey edge. Try "Auto-detect white margins" with "Detect each page separately" ticked, so that pages which moved during scanning get their own crop. Dark or grey edges count as content for the detector, so if a strip stays, drag the box or switch to Manual Selection and cut each side until it is gone.

Open the tool with these settings →

Crop a scanned book with a binding margin

In a scanned book the wide inner margin (the gutter) is on the left of odd pages and on the right of even pages. Use Manual Selection, set the values for an odd page, and tick "Mirror left and right on even pages": even pages then get the same crop with left and right swapped. You can also crop odd and even pages separately with "Odd pages" and "Even pages" under "Apply To".

Open the tool with these settings →

Make a PDF easier to read on a phone or e-reader

Phones and e-readers shrink the whole page to fit the screen, so wide margins make the text tiny. Cropping the white space lets the text fill more of the screen. "Auto-detect white margins" does this in one step; keep 2–3 mm of extra space so no letters touch the edge.

Open the tool with these settings →

Keep only a table, chart or column

Go to the page with the table using the page buttons, choose "Current Page Only", and drag a box around the table. If you need that table as a separate file, first copy the page out with Extract PDF Pages, then crop the single page.

Open the tool with these settings →

Hide headers, footers or page numbers before printing

Cut a few millimetres from the top or bottom with Margin Cropping and only those sides ticked. This hides them on paper and on screen. Remember that they are still inside the file; for confidential headers, use Redact PDF.

Open the tool with these settings →

Crop slides exported to PDF

Presentations saved as PDF sometimes have bars above and below the slide. Measure one bar in the preview, then cut that amount from the top and bottom only.

Open the tool with these settings →

Crop everything except the cover

Choose "Page Range" and start from page 2. The cover page stays exactly as it was.

Open the tool with these settings →

Crop an area to a specific size

For common sizes, use "Crop to a size" under Manual Selection: A4, US Letter, A5, A6, square, 16:9 or 4:3. The tool centres the area on the page (turning it sideways on landscape pages); move the box afterwards if the area should not be centred. For any other size, subtract it from the page size and split the difference between the sides. Example: to keep a centred A5 area (148 × 210 mm) from an A4 page (210 × 297 mm), cut 31 mm from the left and right (210 − 148 = 62, so 31 each) and 43.5 mm from the top and bottom (297 − 210 = 87, so 43.5 each). If the area is not centred, move millimetres from one side to the opposite side; the total stays the same.

Open the tool with these settings →

Crop part of a page and save it as an image

Want a signature, a chart or a photo from a PDF as a JPG or PNG? Go to the page, choose "Current Page Only", drag a box around the area, and set "Download as" to PNG or JPG images. Choose 300 DPI for print or 150 DPI for screens. You get a picture of just that area. To turn whole pages into pictures without cropping, use PDF to Image.

Open the tool with these settings →

Crop a print file to its trim size

Files made for a print shop often have extra space around the page: the bleed (usually about 3 mm on each side) and an area for crop marks. To get a clean page at the final size, for example to share the file on screen, use Margin Cropping on all four sides with the size of that extra area. If the file has 3 mm bleed and no marks, cut 3 mm; if it also has crop marks, check the preview and increase the value until the marks are gone. Keep the uncropped original for the printer.

Open the tool with these settings →

Crop several PDF files the same way

Select several PDFs at once in the file window (or drop them together). The first file is shown in the preview; when you click "Crop PDF", the same settings are applied to every file and you get one ZIP file with all the cropped copies. With "Auto-detect white margins", each file's pages are checked separately, so files with different borders are still cropped correctly.

Open the tool with these settings →

Get the hidden area back ("uncrop")

Because cropping only hides content, the area outside the crop is usually still in the file. Open the cropped PDF in the tool, choose "Remove existing crop (show full page)", pick the pages and click "Crop PDF": those pages are shown in full again. This works when the hidden content was only cropped; if it was deleted or redacted, it cannot come back. The safest option is still to keep your original file, which DonePDF never changes.

Open the tool with these settings →

Split scanned two-page spreads into single pages

When a book or magazine is scanned open, each PDF page holds two pages side by side. Choose "Split each page in half" and "Left | right halves": every page becomes two, in reading order. For Arabic, Hebrew or other right-to-left books, tick "Right half first" so the pages stay in the right order. "Top | bottom halves" splits sheets that hold one page above the other. If the spreads also have white borders, split first, then open the result again and use "Auto-detect white margins".

Open the tool with these settings →

Open the tool for right-to-left books →

Give one page its own crop

Sometimes one page needs a different crop, for example a wide table on page 7. Set the crop for most pages, then go to page 7, adjust the values (or drag the box) and click "Use these values for this page only". The tool lists the pages with their own crop; when you click "Crop PDF", those pages use their own values and the rest use the general setting.

Open the tool with these settings →

What the tool does not do, and what to do instead

  • Delete the hidden area. Cropped content stays in the file. Use Redact PDF to delete it.
  • Make the file smaller. Use Compress PDF.
  • Straighten crooked scans. Cropping cuts along straight lines; it does not rotate a page by a few degrees. Very crooked pages may keep a thin edge; drag the box a little tighter if needed.

Crop, resize, redact or compress: which one do you need?

You want to…UseWhat happens
Hide margins or keep part of a pageCrop PDFThe visible area gets smaller; content is hidden, not removed
Change pages to A4, Letter or another paper sizeResize PDFThe paper size changes and the content is scaled to fit
Remove private text or images for goodRedact PDFThe content is deleted from the file
Make the file smallerCompress PDFImages and data are optimised to reduce the size
Remove whole pagesRemove PDF PagesThe pages are deleted from the file
Change white space around the content without cuttingPDF Margin AdjusterMargins are adjusted around the page content

Troubleshooting

"The margins are larger than the page"

The values you entered add up to more than the page width or height, so nothing would be left. Lower the values. For example, on an A4 page the left and right values together must stay below 210 mm, and top and bottom below 297 mm.

"This PDF could not be opened"

The file may be damaged or protected with a password. Try Unlock PDF if you know the password, or Repair PDF if the file is damaged, then crop again.

The preview does not appear

Very large or complex pages can take a moment. If the preview stays empty, reload the page and open the file again. Updating your browser also helps, because the tool runs entirely inside it.

The wrong side was cut

Cropping follows the page as it is displayed. If a page was stored sideways and shown rotated, "top" is the top you see on screen. Rotate such pages first if the result is not what you expected.

The cropped area shows up again in another program

Some editors can display the full page, including the hidden area. This is expected, because cropping hides content rather than deleting it. Use Redact PDF if that content must not be seen.

Privacy: where your file goes

DonePDF's Crop PDF tool runs in your browser. Your PDF is read and cropped on your own device and is not uploaded to our server, which is why the preview appears without an upload step. The cropped file is saved directly to your device. The tool is free, needs no sign-up and adds no watermark.

Frequently asked questions

Can I undo a crop?

Keep your original file: DonePDF never changes it, it only gives you a new cropped copy. If you only have the cropped copy, open it and choose "Remove existing crop (show full page)" to show the hidden area again, as long as it was cropped and not deleted.

Does cropping work on scanned PDFs?

Yes. A scanned page is an image inside the PDF, and the crop box works the same way on it. Scans are often a little crooked, so Manual Selection with separate values per side usually gives the cleanest edges.

Why is the cropped file the same size as the original?

Cropping only changes which part of each page is shown. Nothing is removed from the file, so the size stays about the same. Use Compress PDF if you need a smaller file.

Can someone see the part I cropped away?

Possibly. The hidden area is still in the file, and some PDF editors can show it again. For anything confidential, remove it with Redact PDF instead of cropping.

Can I crop different pages by different amounts?

Yes. Set the general crop, then go to a page that needs different values, adjust them and click "Use these values for this page only". You can also crop "Odd pages" and "Even pages" separately.

How do I make every page exactly A4 or Letter?

That is resizing, not cropping. Cropping cuts away part of a page; Resize PDF changes the paper size and scales the content to fit.

Can I crop a PDF on my iPhone or Android phone?

Yes. Open the Crop PDF page in your phone browser, tap "Select PDF" and choose the file from your phone. Scroll down to the settings, crop, and the new file is saved to your downloads.

Can I select the crop area by dragging a box?

Yes. Drag on the original page to draw the area to keep, then move it or pull its handles. The values appear under Manual Selection, so you can fine-tune them.

Can the tool remove white margins automatically?

Yes. Choose "Auto-detect white margins". It finds the white border on each page (or uses the current page for all pages) and keeps the extra space you set around the content.

Can I enter the crop in inches?

Yes. Switch the "Units" list to inches or points; all values are converted and your choice is remembered.

Can I crop several PDFs at once?

Yes. Select or drop several PDFs together. The same settings are applied to each file, and you download them in one ZIP file.

Can I split a scanned two-page spread into two pages?

Yes. Choose "Split each page in half". Each page becomes two, left then right, or right then left for right-to-left books.

Can I save the cropped area as a picture?

Yes. Set "Download as" to PNG or JPG images and choose 150 or 300 DPI. Each cropped page, or each half when splitting, becomes one image.

Is the Crop PDF tool free?

Yes. It is free, needs no account and adds no watermark.

Will the text still be selectable after cropping?

Yes. The page is not turned into an image, so text you could select and search before can still be selected and searched.

Ready to crop?

Open the tool, drop your PDF in, and use the live preview to get the margins right before you download.

Crop a PDF now

More page tools are collected in the Merge, Split and Organize PDF Guide.